Changzhou, China

Seraphim Solar System, (“SERAPHIM”), integrated manufacturer of PV products based in Changzhou China, announced that the PV modules Passed ICIM Evaluation.

The Italian Certification Authority ICIM (“Istituto di Certificazione Industriale per la Meccanica”) inspected SERAPHIM’s management system, including equipment, production, process and quality control, warehousing control as well as the staff management, technical development and etc. The company’s superior management system is highly praised during the audit.

With successful certification from ICIM, it enables SERAPHIM’s PV modules with wider-accessible bankable in Italy after the bankability with Unicredit-leasing.

Pursuing with the quality policy, SERAPHIM continues to carry out actions that guarantee the highest quality and the best service for its customers. SERAPHIM’s modules now have been certified with international standard in wide range for certificates, including, TUV (IEC 61215 2nd Edition and IEC- 61730, for EU), CSA (UL 1703, 3rd Edition, for USA, Canada), CEC (IEC 61215 2nd Edition and IEC- 61730, for Australia), all these enabling SERAPHIM to continue its role as a quality oriented company in photovoltaic solar energy.

Changzhou, China

Seraphim Solar System, (“SERAPHIM”, “The company”), which received ISO 9001 quality management system before, announced again that the company has been certified by two more industry standards ISO 14001 and OHSAS 18001, respectively for environmental management system and occupational health and safety after full auditing by an international certification body.

According to GB/T19001-2008 “Quality management systems – Requirements”, GB/T24001-2004 “Environmental management systems – Requirements with guidance for use”, GB/T28001-2001 “Occupational Health and Safety Management Systems – Specification”, SERAPHIM set up integrated management system about quality, environment and safety since start-up. After the process of monitoring and measurement, and internal audit, SERAPHIM pass successfully these international standards. Also, it is proved that integrated management system is appropriate, adequate, proper and efficient. And, it plays an important role in fulfilling corporate social responsibility, enhancing the cohesion, improving the enterprise’s internal management and corporate image, and creating better economic and social benefits.

Changzhou, China

Seraphim Solar System, (“SERAPHIM”), integrated manufacturer of PV products based in Changzhou China, announced that the PV products have been approved by Australia Clean Energy Council (CEC).

CEC listing accreditation is a qualification which demonstrates competence in products, design and installation of stand-alone (SPS) and grid-connected (GC) solar photovoltaic power systems in Australia. It definitely helps SERAPHIM establish Australian market rapidly and effectively, with strong foundation for the market development.

“The development in Australian market is one important strategic operation in sales network expansion worldwide. Seraphim will continuously improve the CEC listed product power range in the future, in order to provide best efficient product for this unique market” the director of sales and marketing, Mr. Light Li from SERAPHIM, added.

Changzhou, China

Seraphim Solar System (Seraphim), integrated manufacturer of PV products based in Changzhou, China, announced that the local government working group led by Party Secretary Mr. Zhang paid a visit to Seraphim manufacturing facility on April 18th, 2011.

Mr. Zhang and group toured the facility and exchanged his ideas with Seraphim management team including Mr. Ze Zhou, CEO and Mr. Polaris Li, General Manager. “the facility is really state-of-the-art and very impressive, the government will strongly support Seraphim’s growth and expansion plan, the renewable products produced here is advanced”, commented Mr. Zhang.

Polaris Li, GM of Seraphim, presented the Seraphim corporate profiles and the 3-years roadmap to Mr. Zhang, he said that all Seraphim employees are encouraged and the management team greatly appreciated the support from government, we will do our best to make sure the company develop rapidly.

Changzhou, China

Seraphim Solar System, (“SERAPHIM”), integrated manufacturer of PV products based in Changzhou China, announced that the product power range has been extended with TUV SUD certification.

With the extended power range, SRAPHIM modules can provide even wider power range for both Mono-crystalline and Poly- crystalline products. For Mono product, power range covers from 95W to 265W and power range covers from 110W to 280W for Poly products. Meanwhile, SERAPHIM is preparing to launch new products with higher power efficiency soon.

SERAPHIM will continuously improve the product efficiency with the industry improvement, to ensure our customer getting the highest efficiency module in the world.

SERAPHIM Joins PV CYCLE Association

Changzhou, China

Seraphim Solar System, (“SERAPHIM”), integrated manufacturer of PV products based in Changzhou, China, announced that it has joined PV CYCLE, an association engaged in setting up voluntary take-back and recycling programs for end-of-life PV modules.

SERAPHIM modules are designed to generate clean and renewable energy for over 25 years. At the end of their commercial life, PV modules need to be recovered and valuable components (such as glass, silicon and aluminum) reused for new module production. PV CYCLE association has been developing robust plans to achieve these purposes with socially responsible PV companies joining its efforts. “When considering the recycle and environment, as a PV module manufacturer, we have the responsibility to minimize the impact of our products to the environment. By participating in PV CYCLE’s waste management and recycling programs, we will be able to better achieve these goals.” said Justin Xi, Officer of Global Sales and Marketing. “

Changzhou, China

Seraphim Solar System, (“SERAPHIM”), integrated manufacturer of PV products based in Changzhou China, announced that all production sites would be shut down for one hour in 26th March 2011, for the Earth Hour. In the coming Saturday, 26th March 2011, it is day for Earth Hour. SERAPIM has decided to shut down the power of its production line and turn off all non-essential lights for one hour on this Saturday (26th), in order to make its contribution to this world wide action.

“What we are doing is to call the attention of the public to care about our environment and make real steps to its protection. This is our responsibility of being a green technology company.” said, Mr. Endy Qian, the Production Director of SERAPHIM. “We also hope our action would be good demonstration for the people to protection our environment, and make our own contribution to this meaningful event”

Changzhou, China

Seraphim Solar System, (“SERAPHIM”), integrated manufacturer of PV products based in Changzhou, China, announced that the new MRP system (phase 1) is online. SERAPPHIM collaborates with MDS Group to develop an MRP system to manage the on-line production and quality control.

“With 3 months development, phase 1 of new MRP system has been launched successfully. With new system, the production management efficiency has been improved greatly, enable us to provide real detailed traceability for each panel”. Mr. Endy Qian, production director of SERAPHIM, added, “Meanwhile it is providing us non-paper production environment and make SERAPHIM double green”

Changzhou, China

Seraphim Solar System, (“SERAPHIM”), integrated manufacturer of PV products based in Changzhou, China, announced that SERAPHIM has announced to implement the new product warranty policy from 1st January 2011.

With the product warranty policy, the product material guaranteed will be extended to 10 years, where it is 5 years in previous warranty policy. For the minimum power output guarantee, SERAPHIM is guaranteeing 90% minimum output in 12 years and 80% minimum pout in 25 years.

“This would be a significant advancement for the company in its future development. And this change will demonstrate that SERAPHIM is able to offer better products and service to our customers, but also to prove our customers that SERAPHIM is a responsible and reliable company with a series of mature and professional management and quality control system.” Mr. Robert Zhu, Global Director of Sales and Marketing expressed his strong confidence.

“We have already studied this new warranty terms for a while and have decided to implement this new warranty with our analysis and research. I believe that it would bring more confidence about SERAPHIM product quality and performance”. Mr. Polaris added.